The importance of Raincoat Manufacturing will be well known to those people who use two wheeler vehicles like bike, scooty etc. for their duty or for moving around. Yes, friends, you must have often seen people leaving in their two-wheeled vehicle even in the rain, but when they reach their destination, they must have seen them going to their office or office without getting wet.
Do you know how all this was possible, if not, then I would like to tell you that it was possible when he wore a raincoat while leaving the house. We all know very well that from July to October, there is almost rain season and no one knows when it will rain these days.
In such a situation, due to the fear of rain, all the work cannot be left even sitting at home, in such a situation, people especially those who reach their office by two-wheelers use raincoats so that they can easily reach their office or office without getting wet. Get it, Therefore, starting Raincoat Manufacturing Business at present can also prove to be very beneficial from the point of view of earning as the number of people using two-wheelers and also the number of working people in India is continuously increasing.
This is the reason that the demand for raincoats is also increasing in the market, so starting a Raincoat Manufacturing Business can be suitable for an aspiring person who wants to do his own business. Before we talk about this topic in more detail, let us know what is this raincoat?
What is Raincoat Manufacturing?
If we talk about raincoat, then it is a coat made of water-resistant and water-proofing material, so it is used on the clothes so that the rain water can not wet the clothes inside. That is to say, raincoat is a coat made of water proofing material which protects the clothes from rain water.
It is helpful in protecting not only clothes but also our body from rain. That is because in Raincoat Manufacturing such fabrics are used that do not allow water to stand on its own i.e. as soon as water falls on this material, this material repels it. Cotton, polyester, nylon, PVC, or rayon are used as fabrics in many raincoats. A raincoat is a perfect item for long-term survival in wet conditions because getting wet can cause many minor health problems and fatigue. Might be possible.
This is the reason that raincoats are used by people in large quantities on rainy days. Commercially, when this type of work is done by an entrepreneur, then this work done by that entrepreneur is called Raincoat Manufacturing.
Sales potential
As we have already mentioned that raincoat is used to protect clothes and body from getting wet. And we also know very well that it rains during the rainy season but it rains in other months also. That’s why often those who go to duty, office in two wheelers prefer to keep raincoat with them so that they can keep their body and clothes safe from water when it rains.
And not only this, since it also has a temperature resistant property, so sometimes it is also used by people to avoid temperature etc. Talking about the present scenario, the entrepreneurs doing Raincoat Manufacturing Business are making them with different designs, sizes etc. to sell them in the markets and make money by selling their products to foreign markets not only in India but in this era of globalization. are earning.
The raincoat market can be segmented on the basis of product type, distribution channel, end use, and geographic as far as product type is concerned it can be divided into three major segments plastic, nylon and vinyl.
Steps to start a raincoat manufacturing business
Starting a Raincoat Manufacturing Business also requires the entrepreneur to take very important steps like management of land and building, management of finance, purchase of machinery and equipment, license and registration, recruitment of employees etc. So let us know how an aspiring person can start his own raincoat manufacturing business.
1. Manage Land and Buildings
Managing land and building is a very important task for any manufacturing business because while managing the land and building, the entrepreneur has to deal with many things like easy availability of electricity, water, road etc at that location as well as the employees, workers. It is also meant to say that if the entrepreneur starting the Raincoat Manufacturing Business has any non-cultivable land of his own, then he can consider setting up such a unit on the same land. Is.
If it is not so, then it would be better if the entrepreneur starts this kind of business by renting an already built building. Since to start this business also the entrepreneur needs a place to set up a small office apart from manufacturing site, space for store room, space for power utilities etc. So looking at this way, the entrepreneur may require 800-1000 square feet of space.
2. Manage Finances
Before managing the finances, make sure to prepare an effective business plan or project report, it is an important document of the business as it contains the entire plan from inception to the success of the business. Through the project report, the entrepreneur starting Raincoat Manufacturing Business will be able to know what will be the cost of starting his business?
And what will be his estimated earnings after a certain time, all these figures are already shown in the project report. Therefore the entrepreneur will be able to manage finances for his business only when he knows the total cost of starting his business including fixed cost and working cost. Entrepreneur can try to arrange finance under any government scheme from subsidy loan, bank loan or from his personal savings.
3. Get the Required License and Registration
By the way, it is not mandatory for the entrepreneur to get any kind of license and registration to start this type of business. But if the entrepreneur wishes, he can get the following licenses and registrations done for his Raincoat Manufacturing Unit.
- Proprietorship Registration.
- GST Registration.
- Factory License and Trade License.
- NOC from Pollution Department
- Udyog Aadhaar Registration
- Trademark registration to establish and protect own brand.
4. Buy Machinery and Raw Materials
Following is a list of the major machinery used in the Raincoat Manufacturing Business.
- PVC Welding Machine
- button snap machine
- cutting machine
- Dies, hand tools and other equipment
The list of raw materials required is as follows.
- Fabric sheet (plastic, nylon, vinyl, etc.)
- button and chain
- packing material
5. Learn the construction process
Before starting the Raincoat Manufacturing Process, the raw material is procured from the local authorized vendor or supplier and kept for storage in the store room.
The raincoat is then designed keeping in mind the requirement of the customer, market trends and specific requirements. After getting approval on the design from the design department, this design is sent to the skilled machine operator for fabrication.
And in its next step, with the help of cutting machine, the fabric is cut into the required length and width according to the design, although this process of fabric cutting through the machine also requires a skilled operator. One who monitors the operation of the machine is then inserted into the PVC welding machine to weld the PVC or other fabric to the required dimensions.
The two open ends are welded by the operator to produce the required design. PVC welding machines used in the raincoat manufacturing process use high frequency welding or radio frequency welding techniques.
In this, both pieces of material are placed on a table and pressure is applied to this surface and a die is used to guide the process. High frequency welding is used in many industries where a strong consistent leak proof seal is required.